随着集成电路产业中晶圆尺寸的不断增大,化学机械抛光(CMP)成为目前唯一能够同时对晶圆实现局部平坦化和全局平坦化的技术。CMP后清洗需要及时去除CMP工艺过程给晶圆表面带来的大量污染物,确保芯片的后续工艺不受影响,抛光中使用的纳米颗粒是其中的主要去除目标之一。目前,CMP后清洗的研究大多停留在宏观层面上,即通过调整工艺参数和改进清洗设备来实现清洗效果的提升。因此,亟需开展深入的CMP后清洗机理研究工作,解决清洗深层理论与技术面临的难题,为CMP后清洗工艺提供思路和理论基础。本文的研究重点为揭示纳米颗粒与晶圆的相互作用机制,探究清洗过程中纳米颗粒的运动规律和去除机理,主要内容如下:在纳观尺度上,用分子动力学模拟了清洗中SiO2纳米颗粒在晶圆上的去除和再沉积过程,研究了颗粒在动态过程中的运动特性,并分析了化学吸附的颗粒在清洗过程中与晶圆的成键和断键原理。此外,通过调整仿真模型中的溶液环境,揭示了水和过氧化氢溶液对Si晶圆上SiO2颗粒行为的作用机理,以及水、氨水溶液与柠檬酸溶液对Cu晶圆上SiO2颗粒行为的影响机制。分析了化学吸附的10 nm SiO2颗粒在机械刷洗过程中的运动特性,定量表征了不同外力作用范围下的颗粒去除难度。研究了颗粒动态去除过程中提拉、滚动和滑动三种去除方式在运动轨迹中的占比,发现外力条件主要影响颗粒的横向运动,而环境湿度主要影响颗粒的提拉运动。另外,分析了颗粒去除过程中的摩擦特性,讨论了不同外力条件和环境湿度下颗粒与晶圆的摩擦力。在仿真结果的基础上,用基础表征实验探究了常用清洗剂SC-1溶液的作用机理,验证了其对Si晶圆表面亲水性以及颗粒和晶圆间静电斥力的调节作用。用超声波清洗机开展宏观清洗实验,定量表征了不同浓度SC-1溶液的清洗能力。进一步的,在SC-1溶液的基础成分中添加表面活性剂,研究改进的清洗液对颗粒和晶圆物化性质的影响,通过宏观实验证明表面活性添加剂实现了Si晶圆上纳米SiO2颗粒清洗效果的改善。
With the continuous increase of wafer size in the field of the very large-scale integration (VLSI), chemical mechanical planarization (CMP) has become the only technology that can simultaneously achieve local and global planarization for wafers. In order to ensure the chip yield, post-CMP cleaning is supposed to promptly remove the multitudinous pollutants on the wafer brought by the CMP process, in which nanoparticles applied in CMP process are one of the main removal targets. Currently, studies on post-CMP cleaning are mainly conducted at the macro level, which include improving the cleaning effectiveness by adjusting process parameters and upgrading cleaning equipment. Therefore, there is an urgent need to conduct in-depth research on the mechanism of post-CMP cleaning, so as to solve the problems faced by the deep theory and cleaning technology, and provide viewpoints and theoretical support for the post-CMP cleaning. This paper aims to reveal the interaction mechanism between nanoparticles and the wafer, and explore the movement rules and removal mechanisms of nanoparticles on the wafers. The main content of this paper is listed as follows:At the nanoscale, molecular dynamics simulation was used to simulate the dynamic removal and redeposition process of SiO2 nanoparticles on Si and Cu wafers. The motion characteristics of particles during the dynamic process were studied, and the combination and fracture principle of chemical bond between chemisorbed particles and wafers during cleaning was analyzed. In addition, by adjusting the solution environment in the simulation model, the mechanism of water and hydrogen peroxide solution on the behavior of SiO2 particles on Si wafers were revealed, and the mechanism of the action of water, ammonia aqueous solution and citric acid solution on the behavior of SiO2 particles on Cu wafers were explored.The kinematics characteristics of chemically adsorbed SiO2 particles with a diameter of 10 nm in the process of mechanical brushing were studyed. The difficulty of particle removal under various external force ranges was quantitatively characterized, and the proportion of particle lifting, rolling and sliding in the movement track during the particle removal process was analyzed. It was found that the external force conditions mainly affected the horizontal movement of particles, while the environmental humidity mainly affected the lifting movement of particles. The friction characteristics during particle removal were also studied, and the frictional forces between particles and wafer under different external force conditions and environmental humidity were discussed.Based on the simulation results, the mechanism of SC-1 solution was explored through basic characterization experiments. It was found that the components of SC-1 solution, including hydrogen peroxide and ammonia, can regulate the hydrophilicity of the substrate surface as well as the electrostatic repulsion between particles and the wafer. To quantitatively characterize the cleaning ability of SC-1 solutions with different concentrations, macroscale cleaning experiments were conducted using an ultrasonic cleaning machine. Furthermore, the formula of the cleaning solution was optimized by adding surfactant components to the SC-1 solution, and the impact of the improved cleaning solution on the physicochemical properties of particles and wafers was studied. The results of macroscopic experiments demonstrate that the addition of surfactants improves the cleaning effect towords SiO2 nanoparticles on Si wafers.