登录 EN

添加临时用户

外场增强的水汽发电研究

Environment-Enhanced Moisture-Enabled Electricity Generation

作者:白佳昕
  • 学号
    2019******
  • 学位
    博士
  • 电子邮箱
    mar******com
  • 答辩日期
    2023.05.26
  • 导师
    曲良体
  • 学科名
    机械工程
  • 页码
    131
  • 保密级别
    公开
  • 培养单位
    012 机械系
  • 中文关键词
    绿色能源,湿气发电,外场增强,界面调控,纳米压印
  • 英文关键词
    green energy, moisture-enabled electricity generation, outfield enhancement, interface modification, nanoimprint

摘要

新型清洁能源技术的开发是解决全球能源危机和温室气体排放的有效途径。其中,湿气诱导发电作为一类全新的电能产生技术,主要利用气态水分子与功能材料之间的相互作用来产生电能,具有结构简单、制备方便、无污染物排放等优点,吸引了众多研究者的关注。然而,目前的湿气发电体系只能利用环境中的水汽作为唯一的能量来源,且依赖于特定的实验条件,在开发过程中缺乏针对性的发电材料设计和器件界面调控,产生的电流密度普遍不高,难以应用于复杂的自然场景。因此,本文针对外场环境如光、热作用下的水汽发电进行研究,引入太阳能、热能与湿气协同作用,同步收集环境中丰富的多种能源形式;通过对湿气发电材料的优化调控和材料-电极界面的微观设计,深入探索了载流子的产生和传输机制,建立了高电流密度输出的发电体系。光能利用方面,基于聚电解质和光敏色素的复合,构筑“三明治”堆叠形式的发电器件,吸附湿气的同时利用光照协同产生电能。与传统湿气发电器件相比,光增强湿气发电器件的电流密度大幅度提高。经实验结果和蒙特卡罗模拟证实,水分子吸附诱导电荷分离,进一步促进光生载流子的传输,从而在发电过程中提供了更丰富的载流子类型。在自然界中,很多表面结构都具有液体传输和光捕获的功能,受此现象的启发,发展自诱导原位压印法,构建电极-发电层界面微结构,改善了电极-发电层之间的相互作用,有效拓展了材料的活性面积,湿气吸附能力增强了227%,光捕获能力提升了100%,载流子的数量显著增加,产生的电流密度达到1.6 mA cm?2,是目前同类器件发电性能的最高水准。热能利用方面,基于低热导率、高离子电导率的聚电解质-导电聚合物-氧化还原电对三元复合发电层,构建热增强的湿气发电器件,利用水分子吸附梯度和温度梯度共同驱动载流子传输,使输出的功率密度增大了1100%。组装得到的一系列原型装置,通过人体及户外场景测试验证了器件在真实场景中的适用性,初步实现在能源供给、智能电子等领域的尝试应用,显示出湿气发电体系的实际应用潜力。本论文围绕探索基本原理、设计器件结构、改善工作方式和拓展应用场景四个层面进行系统研究,以湿气发电为基础,提出全新的外场增强概念,验证了湿气发电迈向实际应用的可能性,也为开发多功能杂化能源转化技术开辟了新的思路。

Rational utilization of renewable and clean energy is vital to solving global environmental problems and energy crisis. Gaseous water, regarded as one of the most abundant natural resources on the Earth, presents great potential on energy collection and conversion. Moisture-enabled electric generation technology utilizes the interaction between water molecules and functional materials to achieve power output directly. This kind of moisture-enabled electric generator (MEG) has attracted increasing attention owing to simple device setup and byproduced pollutant excluded showing scientific significance. However, most MEGs are driven by the single energy source of moisture from environment, and they heavily dependent on artificial conditions of high relative humidity and special requirements created in the laboratory. The current MEGs lack of interface regulation and material design, resulting in weak current density, which is incapable of making full use of various green energy sources in the environment, and to realize practical application in complex natural scenarios. This paper presents a novel multi-source collecting technology, and focus on the water molecules adsorption, ion diffusion, carrier transport and the combination of dynamic mechanism based on the optimization of function material system and the microstructure interface design. The power generation system with high current density is established through synergy of solar energy, heat energy and moisture-induced chemical potential energy change. The hybrid power generation device is constructed by composite of polyelectrolyte and phytochrome, which synchronously absorbs moisture and harvests illumination for electric generation. The current density of light-enhanced MEG significantly increases comparing with typical MEGs because moisture-induced charge separation accompanying with carrier transfer to provide abundant carriers and further enhance electric generation performance, which is confirmed by experimental results and Monte Carlo simulation. Inspired by the natural structure of the ecosystem, the self-induced imprinting strategy is designed to in situ establish the interface microgroove architecture. The interface with occlusal microgroove structure will expand active area of electricity-generation material to regulate water molecule migration and light propagation, resulting in 227% enhancement on moisture adsorption and 100% boosting of light collection compared to the flat counterpart. This interface-enhanced electric generator is developed to offer a considerable short-circuit current density of up to 1.6 mA cm?2. In addition, the heat-enhanced moisture enabled power generator is constructed by material with low thermal conductivity and high ionic conductivity. The power density of this heat-enhanced MEG is higher than that of typical MEG with enhancement of 1100%. The results of long-term outdoor testing verified the applicability of this systems in natural environment. This work promotes moisture-enabled power generation to the practical stage.To summarize, multiple energy source collection, surface/interface modification and application potential are systematically studied. The import of other sources to moisture-enabled electric generation is put forward to efficient improve power output, which lays a solid foundation for progress to industrial application and provides a new platform for the development of multifunctional hybrid energy conversion technology.