航空煤油是当前航空动力装置的常规燃料。航空煤油燃烧性质的研究,对于航空发动机的研发设计、以及燃油清洁高效的应用均具有重要意义。但煤油的组成异常复杂,主要涵盖链烷烃、环烷烃及芳香烃等物种,加之因类型、产地、年限造成的差异,导致对其燃烧性质的实验研究与数值模拟变得极为困难。研究表明,航空煤油的燃烧涉及几百种组分、数千个基元化学反应,发展包含所有组分的煤油化学反应动力学机理模型是不切实际的。目前多数研究者均采用贴近实际煤油理化性质的替代燃料开展研究。在针对国产RP-3煤油成分分析和借鉴文献数据的基础上,本文提出了一个摩尔比为40%的正癸烷、42%的正十二烷、13%的乙基环己烷、5%的对二甲苯的煤油替代燃料模型。分析发现,该替代模型与RP-3煤油具有相似或相近的碳原子数、氢原子数、碳氢比、分子量、热值、粘度和密度。燃料的火焰传播速度是表征燃料燃烧特性的重要指标,也是验证其化学动力学机理准确性的重要依据之一。对冲火焰因为有效解决了火焰下边缘散热的问题,在实验测量中得到广泛的应用。本文设计并搭建了适宜大碳氢液体燃料的对冲火焰实验台。利用该实验台测得了标准大气压下不同初始温度的正癸烷、正十二烷、乙基环己烷、对二甲苯、甲苯以及RP-3煤油和替代燃料混合物等多种燃料与空气预混气的火焰传播速度。分析发现,替代燃料与RP-3煤油具有相近的火焰传播速度,印证了替代燃料模型与煤油化学反应特性上的相似性,进一步印证了替代燃料模型的合理性。以实验测量结果为依据,并借鉴大量的文献数据资料,针对替代模型中的正癸烷、正十二烷、乙基环己烷、对二甲苯四种燃料发展了各自的化学动力学机理,通过模拟计算与实验数据比较,发现四种机理均能如实再现各自对应燃料的火焰传播速度、点火延迟时间以及火焰中间组分分布等燃烧特性。将四种燃料的机理进行了整合,构建了一个针对RP-3煤油的混合机理。该机理包含168种组分和1089个反应,规模适中。通过预测计算并与RP-3煤油四组分替代燃料/空气火焰传播速度实验值比较,发现该机理有很好的准确性。采用该机理进行了进一步的分析,研究了替代燃料配比、燃料结构、当量比等对火焰传播速度的不同影响。
Aviation kerosene is conventional fuel of the aircraft power plant. Study on the combustion properties of aviation kerosene, is of important significance for the design and development of aero engine, and clean and efficient application of fuel. But the composition of kerosene is very complex, mainly including alkanes, cycloalkanes and aromatics, in addition of the differences for type, origin, productive life, which leads to the extreme difficult to the experimental and numerical research. Research shows that the combustion of aviation kerosene involves hundreds of species and thousands of elementary reactions, so it's unrealistic to develop the chemical kinetics model containing all the species and reactions. At present, most researchers use the alternative fuels which are close to the actual nature of kerosene to Carry out research.On the basis of the component analysis of the RP-3 kerosene, a alternative fuel model containing molar ratio 40% n-decane, 42% n-dodecane, 13% ethylcyclohexane, 5% p-xylene was proposed. Through the analysis, it's found that the alternative fuel model is same as RP-3 kerosene on the number of carbon atoms and hydrogen atoms, hydrocarbon ratio, molecular weight, calorific value, viscosity and density.Flame speed is not only an important index of combustion characteristics of fuels, but also is one of the important basses for the accuracy verification of chemical kinetics mechanism. There are many kinds of methods for the determination of flame speed. Relatively speaking, because of effectively solving the problem of radiation on downstream to avoid the influence of heat loss on the flame propagation characteristics, the counterflow twin-flame is widely used in the experimental measurements. A new counterflow twin-flame test system suitable for the large molecules hydrocarbon liquid fuel was designed and built. Using this system, flame speeds of n-decane, n-dodecane, ethylcyclohexane, p-xylene, toluene, RP-3 kerosene and alternative fuels with air under different initial temperatures at standard atmospheric pressure were measured. The analyses of results shows alternative fuels have the similar flame speed as RP-3 kerosene, which confirms the similarity of chemical reaction characteristics of alternative fuel models and kerosene, and further justifies the reliability of alternative fuel model.Based on the experimental measurement results and a large number of experimental data available in literature, the chemical kinetic mechanisms of n-decane, n-dodecane, ethylcyclohexane, p-xylene were developed respectively. Using new mechanisms, through simulation, flame speeds, ignition delay time and mole fraction distributions of intermediate components in the flame were calculated. By comparison with the experimental data, it's found that the four mechanisms can accurately predict the combustion characteristics of fuels. Through integration of four mechanisms, a mixing mechanism for RP-3 kerosene was proposed。The mechanism consists of 168 species and 1089 reactions, and its size is not very large. By comparing the calculated results with the experimental flame speed of four components alternative fuel of RP-3 kerosene with air, it’s found that the mechanism has good accuracy. The mechanism is used on the further analysis to study the different effects of ratios of alternative fuel, structure of the fuels, equivalence ratio on the flame speed.